Pokémon Quest – Kanto Starters
Long story short: couldn’t leave Pikachu hanging all alone. Had to make some friends. Or as my wife calls them, “Bubblesour,” “Squirturt,” and “Charmando.”
And thanks to u/kovkov on Reddit, the rest of the starter assets were ready and available for modeling!
Helpful Tools:
3D Printer (or printing service)
Gorilla Glue
Paint Supplies (if that’s your thing)
001 – Bulbasaur
Click HERE to get the STL files from MyMiniFactory.
March 2020 UPDATE: Files can be downloaded directly from this site at the bottom of the page. They are also available on Prusa Printers!
Printing details:
PLA 20% infill
Supports: No
Brim: No
Raft: No
QB-Body, QB-Bulb, and QB-Head assemble simultaneously with interlocking extrusions. If you try to assemble these parts individually, you’re going to have a bad time. The feet and ears are straightforward and are keyed to where they belong. Use a little glue to secure all the small parts.
004 – Charmander
Click HERE to get the STL files from MyMiniFactory.
March 2020 UPDATE: Files can be downloaded directly from this site at the bottom of the page. They are also available on Prusa Printers!
Printing details:
PLA 20% infill
Supports: No
Brim: No
Raft: No
All parts are keyed to fit together where they belong. Use glue to keep them secure.
007 – Squirtle
Click HERE to get the STL files from MyMiniFactory.
March 2020 UPDATE: Files can be downloaded directly from this site at the bottom of the page. They are also available on Prusa Printers!
Printing details:
PLA 20% infill
Supports: No
Brim: No
Raft: No
All parts are keyed to fit together where they belong. Also, make sure you assemble QS-Body, QS-Shell, and QS-Tail at the same time, and before adding QS-Head. Again… glue…
Now get on out there and unlock all the secrets of Tumblecube Island! I’ve only made it to the Chamber of Legends. That Mewtwo is tough!
Also, I got a little crazy and added a TMNT-style bandana for some Teenage Mutant Ninja Squirtle action.
Like what you’re seeing here? Give me a follow on Twitter, @DragonMtnDesign, or if you see me on Reddit, u/DragonMountainDesign, “hey.”
Also, double-thanks to kovkov for the support on MyMiniFactory! You are a true hero.
.
.
.
March 2020 UPDATE: Files are available here! Click the Download buttons below for a zip file.
Files are available under the Creative Commons BY-NC-SA license.
