GameBoy SKÅDIS Mount Vol. II
Got a 1st-gen GBA approximately 1,000 years ago back in February, and finally got around to making a mount for it. Since most of the groundwork was laid in the original set, the effort was thankfully as minimal as the design.
And because my daughter is all about The Legend of Zelda: Four Swords, I’ve also made a simple hook for link cables.
Helpful Tools:
3D Printer
Hammer
1. Print out Parts
Direct download at the bottom of this post.
The BinHook3 component is exactly the same as the one in the original post, but I’ve included it with this package anyway.
All Parts
Material: PLA
Infill: 15-20%
Supports: No
Brim: No
2. Assemble Bin
As with the other designs, press-fit the hooks into the bins (x2) so that the actual “hook” features are at the top of the bin as shown. Use a hammer (gently) if necessary.
3. Arrange & Display
Place them in a way that is pleasing and functional for you.
FYI: GBA games fit within the original CartBin, and the GBA SP fits in the original GBCBin.
Files
Click the Download button below for a zip file with all these Vol. II components.
Files are available under the Creative Commons BY-NC-SA license.
Like what you’re seeing here? Leave me a comment here, follow me on twitter @DragonMtnDesign, or say “hey” if you see me or my work around on Reddit (u/DragonMountainDesign).
2 Comments